Imuto Bathroom Organizer Rack Towel Holder Toilet Wall Hooks Corner Shelf Triangle/Square Shelving

About the product:

Rust proof, featuring high-quality space aluminum material

Aluminum Material：Reinforced edges, thickened panels

The edges are carefully sanded and thickened, smooth and do not hurt your hands, you can take it with ease

size:

Bath towel holder（58.5*22.5*4.5cm）Square shelving(33*15*1.5cm)Soap holder(14*10.5*3cm)Triangular

shelving（22*22*5cm）Towel hook(38*5*5cm)

✤About shower:

Shower combination （ Shower Head + non-punching Holder + 1.5m Hose）

5 kinds of gear adjustment, different water outlet methods,0.4mm hole design and 110 silicone ports make the water

more delicate and comfortable, it ensures strong spray performance even at low water pressure

About installation:

Two installation methods

✤ Drilling installation {Screw package}

✤ Drilling free installation {Nail free glue}

Nail-free glue【Installation steps】

1. Please clean the wall first to make sure the wall is clean and dry.

2. Apply non-marking glue on the installation surface in strips or dots.

3. Stick auxiliary stickers on both sides respectively.

4. Confirm the installation position and press firmly to bond.

5. After waiting for 48 hours, you can tear off the auxiliary sticker and start using

Nail-free glue [removal steps]

Q: The non-marking adhesive is too sticky, how to remove it in the future?

A: Dismantling is super easy, just three steps:

1. Blow the hair dryer on the non-marking glue for three to five minutes to soften it

2. Use a flat-blade screwdriver to insert the adhesive gap between the product and the wall, and use a mallet to slowly

tap in until the product and the wall are completely detached or lifted.

3. Use a utility knife or scraper to remove the last glue residue on the wall and the product.

Q: Why did the product fall off after using it for a while?

A: So far, the reasons for falling off are as follows:

1. The wall is not cleaned first to remove oil stains or oil stains.

2. For unsuitable walls, or the walls have post-processing, use tiles with ground polishing glaze.

3. Use without waiting 48 hours.

4. The glue-free method is incorrect. The non-marking glue needs to be in contact with the air to cure, and the glue must

maintain a proper gap.

5. The auxiliary sticker is not pasted, and the product is not tightly bonded.