433Mhz Universal 2 Key Wireless Remote Control Cloning Code Duplicator Gate Garage Door

Features: 1. Better range, more durable and longer battery life. 2. With LED transmission indicator and low battery, for visual feedback and indication of the operating mode. 3. Comes with a buckle for easy transport. 4. Application: central locking systems of the vehicle, garage doors, electronic doors, car sunroofs, heating systems, etc. 5. Remote only, other demo accessories in the picture are not included! Specification: Type: Remote Control Black colour Channel: 2 (on / off) Frequency: 433 MHz Rated voltage: 12 V Rated current: 10mA Instructions: 1. clear code: two fingers at the same time hold the unlock key and the lock key; the LED light flashes rapidly 3 times in about 2 seconds; let go one of the fingers (the other hand can not let go), And then use the loose finger to quickly click three times on the loose button until the LED light flashes quickly; both fingers can relax; then press any key on the remote control; when LED light goes off, it means that the clear code is successful (four keys all empty); If after pressing a button on the remote control, the light is still lit, this indicates that the original code has not been successfully erased. You must re-erase, and only a successful erase of the code can succeed in cloning. You can erase and clone the code multiple times. 2. copy: left hand taking the original remote control, right hand taking our cloned remote and keeping two remotes as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash quickly 2 times; after one second, the light continues to blink and release your fingers; then press the key after successful study, the light will continue to light, which means that the first key code on the original remote control has been copied to the other remote control; the same method can be used in turn on the second key, The third key ... If the copy is successful, the remote control function is the same as the original remote control. 3. Restore: when you accidentally erase the copy of the code on the remote control, you can simultaneously press the remote control copy of the two bottom keys, the LED lights flash quickly, release after pressing any key, long light, indicating that the remote control code is restored. Before using our copy remote control, be sure to remove the existing code from the remote control. Package included: 1 x remote control (with battery)