Set up guide:
1. Connect the end(f-male)of the attached coaxial cable to the ANT/IN connector on the back of the TV or DVB-Tuner. 2. In the TV/'s setup menu set the tuner mode to ''Antenna''or''Air''.for more detailed instructions, please refer to your TV manual. 3. In the Tv/'s setup menu, set the TV to ''scan for channels. this can sometimes be listed as an auto-program. Auto-scan, channel search, or channel scan. consult the tv manual for detailed instructions. 4. If reception is sporadic, try moving the antenna to another location and rescanning the tv until optimal position is found. 5. Fix the antenna at the optimal position you found.
Note:
1. placing the antenna higher or close to/in a window may result in better reception. you must rescan whenever you move the antenna.
2. if you use a flat HDTV, please go through your TV manual to make sure your TV comes with a built-in tuner for Freeview.
3. make sure you are using an HD receiver; otherwise, no HD channels can be picked up. please read the receiver manual.
4. you need to retune your Freeview TVs and digital receiver from time to ensure you are receiving all available services. retuning takes only a few minutes and can be done with your remote control.
5. TV reception capacity depends on the distance between your home, transmitting tower, and surrounding environments.