It is recommended to use less than 30 minutes each time, no more than 3 times a day, to prolong the service life.
only suitable for low density foam. When not in use, be sure to turn off the heating switch. Don't insert the material directly with the tip of the pen, it can be burned at the bevel when it is heated.
*Be sure to wait until it's heated before using it.*
The product contains a 10CM cutting pen, a power adapter (with wire control switch)
It is suitable for cutting medium and low density foam, pearl cotton, not sponge, but can be bent.
A pen can only be bent once, it cannot be bent repeatedly, and it cannot be straightened again after bending, it will be shaped once, otherwise it will break!
Especially suitable for small craft model making, advertising font making, student manual model making and so on.
1. The weight of the electric heating pen in hand is only 40 grams.
2. You can start cutting from any part of the foam board.
3. It can be easily cut into any shape.
4. The heating tube is made of stainless steel with a diameter of only 2mm,
5. The preheating speed is fast, and it can be heated to 210°C within 10 seconds.
6. With wire control switch, it is safer and more convenient to use.