Lanbowan 5ghz 19dbi Mimo Sector Antennas Ant5158d19b-120dp For Ubiquiti Mimosa Networksi Infobahn

Lanbowan 5GHz 19dBi Mimo Sector Antennas (ANT5158D19B-120DP) For Ubiquiti / Ubnt / Mimosa Networks / Cambium Networks / Mikrotik / Ligowave Radios Installation Requirements •  13mm wrench •  Shielded Category 5 (or above) cabling should be used for all wired Ethernet           connections and should be grounded through the AC ground of the PoE.           We recommend that you protect your networks from the most brutal environments and            devastating ESD attacks with industrial grade shielded Ethernet cable. Bracket  Installation ①  Open the waterproof cover，attach the RF Cables to the connectors of antenna ②  Press the bracket handle，align the mounting tabs on the back of the Station with        the four mounting slots on the bracket，Slide the Rocket down until it locks into place. ③  Unscrew the plastic nut on the interface of station ④  Connect the other end of the 2 RF cables to the station and close waterproof cover. ⑤  Secure the Slotted U-Bracket to the upper Mounting Lugs of the antenna using two nuts.       Secure the Slotted U-Bracket to the lower Mounting Lugs of the antenna using two nuts. ⑥  Open the antenna small fixing clip, fix the two small fixing clips to the pole       with the disc mother, and mount the antenna to the pole. 0.png Note: The mounting assembly can accommodate a Ø 30 - 70 mm pole. ⑦ Completed installation. ⑧  The antenna has an Mechanical downtilt of 4°. To further adjust the elevation angle:       a. loosen four bolts on the U bracket and two butterfly nuts on the pole clamp.       b. Slide the antenna to the desired tilt.          （The brackets may slide along the pole, depending on the angle of the elevation tilt）       c. Tighten all bolts and nuts to approximately 25 N-m. Technical Specifications Electrical Frequency Range: 5100-5850MHz Gain: 18dBi ± 1.5dBi Polarization: Vertical and Horizontal Isolation: >25dB F/B Ratio:>25dB Horizontal Beamwidth(6dB) :120° type Vertical Beamwidth(3dB) :4° type V.S.W.R:<2 Max Power:20W Nominal Impedance :50Ω Lightingprotection :DC Ground   Mechanical Connector :2 x RPSMA Antenna Size :78.5×15×2cm Antenna Weight :3kg Colour: gray Antenna cover material :UV Protection ABS Operatingt emperature: -40°C to +70°C (-32°F to +158°F)